ML Motorsport - Classic mini and retro car specialists

MLM Top Parts

MBRacing wheels

We have been agents for the superb MBRacing wheels since 1996
MB make 3 piece modular wheels for all cars, their mini range consists of 10" 12" and 13" sizes


10" 12 spoke


New 12" x 6"


MB45 Magnesium 6 x 13
Brooklands Green edition

 

We have used these wheels on most of the project cars we have built over the years and have proven to be the finishing touch on minis be they road/show/race, MB wheels are in fact designed to be the ultimate competition wheel, one of the lightest and roundest! race wheels availiable for the classic mini, the centres are 6082 billet aluminium electro chemically anodised in silver or gold, the Magnesium 13" centres are cast and machined and supplied in black powder coat, the wheel pictured where specially painted brooklands green for a customer.

The inner and outer rims start off as a sheet of 4mm aluminum which are form on a specific spinning and forming lathe the size of a truck!

The parts are assembled using silicone sealer and fixed together with 16 cap screws and lock nuts, the beauty of this design is the wheels can be simply repaired with new rims should damage occour.

These wheels are made to order and cost from £195 per wheel, specific wheel nuts are supplied.
Note: lead times for orders can be around six months.


Wheel pictured 6 x 10 MB other widths are 7 and 8 inch wide, 10" wheels fit all mini brake setups up to 7.9" and six pot caliper types.

Wheel pictured 6 x 12 MB Only 6" wide availiable with 12" fits all front brake setups up to 8.4"

Wheel pictured 6 x 13 MBR45 Special offset and pcd to suit K series based vtec conversion on this car widths include 6,7,8,10 inch

All wheel sizes will need wider arch extensions and some relief of the front wing arch leading edge for steering clearance.